Putzmeister frequency hopping radio control:

The modular concept applies to all cable and radio remote control units and has the following advantages for all variants:
  • Ergonomically designed casing with guard clip makes handling easier
  • Information and operating panels are separate with LEDs providing a clear overview at all times
The superior full-size MRC radio remote control unit:
  • Simultaneous execution of 6 movements with genuine two handed operation (no reaching round)
  • Rapid task-specific reduction of the maximum boom speed via simple joystick input
  • Continuous frequency changing by the automatic frequency hopper virtually excludes radio interference
  • The active Emergency Stop signal is transmitted with a markedly reduced reaction time. This new safety concept is considerably less sensitive to external interference
  • Acoustic signals also draw the operator's attention to status changes (for example, the truck-mixer driver switching the pump off)
  • The new frequency band is not shared with, for example, radio telephony or the like
  • The machine operator does not need to switch radio frequency manually
  • The RF module can be changed rapidly if necessary when adapting to a different national frequency or during servicing
  • The battery compartment is located protected at the side of the body