|
The universal worm pump for ready-mix dry, mortar out of a bag or silo as well as wet mortars and site mixes. The S 5 is a modular system. The basis for this is a powerful worm pump with a performance of up to 40 l/min. The TM version also has an added-on plate mixer for its own mixes, the CM has a continuous mixer for dry ready-mix mortar.
Suitable for: materials up to 6 mm grain, e.g. ground coat plasters and insulating plasters, rough coat and textured plasters, trowel plaster, adhesive bonded joint, masonry mortar, refractory mortar, sealing suspensions, injection mortar, filling and anchoring mortar, dispersion plaster, fiber mortar, fibreglass concrete, bonding mortar, floor screed - infinitely variable according to material from approx. 7 l/min to 40 l/min. (floor screed up to 70 l/min with 2L88).
|
|
| S 5 EV
|
|
Worm pump drive, electric 5.5 kW, 400 V/50 Hz, variable drive, pump type 2L6, 7�40 l/min with a max. delivery pressure of 25 bar, max. grain 6 mm, hose connection with pressure gauge 35 mm. Recommended is a site connection cable with CEE plug 5 x 4 mm�, 32 Amp. If pumpable wet mortar is mainly pumped and sprayed, a compressor must be available on site for the spraying work.
Standard equipment: Set of wheels with pneumatic tires, electric remote control cable 21.5 m, operating instructions, standard tools.
Part no. PM111 452.010
|
| S
5 EV/CM:
|
|
Equipment as above but with a built-on continuous mixer CM 928/040�A01 with a mixing performance of 40 l/min and an electric drive of 5.5 kW. Ideal for dry mixed material from bag or silo.
Standard equipment: set of wheels with pneumatic tires, electric remote control cable 21.5 m, control unit (part no. 202 541.008), filling level probe cpl. 42 V (part no. 204 542.008), operating instructions, standard tools.
Part no. PM111
452.020
|
| S
5 EV/TM:
|
|
Equipment as above but with a built-on plate mixer TM 100 with a mixing volume of 80 l and an electric drive of 1.9 kW. Suitable for mortar of several components or longer mixing time.
Standard equipment: set of wheels with solid rubber tires, electric remote control cable 21.5 m, operating instructions, standard tools.
Part no. PM111 452.030
|
| Technical data:
|
S 5 EV |
S 5 EV/CM |
S 5 EV/TM |
| Pump: |
Worm pump Electric/Variable drive |
Worm pump Electric/Variable drive Continuous mixer CM 928/040-A01 |
Worm pump Electric/Variable drive Plate mixer TM 100 |
| Pump type: |
2L6 |
| Output: |
7 - 40 l/min |
| Del. pressure: |
25 bar |
| Delivery
distance: |
up to a distance of 80 m, 60�100 m high |
up to a distance of 80 m, up to 60 m high |
| Drive worm pump: |
5,5 kW, 400 V/50 Hz |
5,5
kW |
5,5
kW |
| Mixer drive: |
- |
5,5
kW |
1,9
kW |
| Hose connection: |
35 mm |
| Dimensions (LxWxH
in mm): |
2290x 680 x 650 |
2840 x 680 x 1200 |
2290 x 680 x 1150 |
| Weight: |
190 kg |
360
kg |
400
kg |
| Supplementary
equipment for the S 5 series |
PM Part no. |
| Compressor HANDY, 250 l/min, 400 V/50 Hz 3-phase |
000 235.008 |
| Compressor V-MEKO 400, 360 l/min, 400 V/50 Hz, 3-phase and GEKA coupling 1⁄4� |
205 767.009 |
| Compressor 600 l/min, 10 bar, 20 l air accumulator, 3 kW, 400V, 50 Hz |
213 264.002 |
| GFB (fibre glass concrete) version (only in connection with pneumatic remote control) |
001 971.002 |
| Pneumatic remote control cpl. |
201 754.003 |
| Silo connection D 245 � flexible |
072 241.004 |
| Chassis F 80, 750 kg (208 932.006) |
002 772.006 |
| Remote control ON/OFF, 21.5 m |
071 020.006 |
| Extension for this, 20 m |
205 694.004 |
| Vibrating screen MW 10, 400V, 50 Hz (208 322.001) |
002 778.000 |
| Plate mixer TM 100, 1.8 kW, 400 kW |
111 353.002 |
| Wear conical plate (floor plate) for TM 100 |
208 796.006 |
| Pump parts D5 (201 073.001), variable 3�19 l/min (extra cost) |
002 717.004 |
| Pump parts 2L88 (204 402.006), variable 9.5�54
l/min (extra cost) |
002 718.002 |