|
The most powerful Mixokret
of all time � with turbo Diesel and hydraulic drive
This floor-screed conveyor
adds more to the advantages of the M 740 D - a compressor performance of
over 5 m�/min.
47 kW turbo Diesel and hydraulically-driven mixer. A Mixokret that is ready
for any challenge. Ideal for mixing and conveying floor-screed, sand,
free-flowing and fine concrete with grain up to 16 mm.
|
|
| M
760
DH
|
|
|
Hydraulic mixer drive
with overload protection (patent) and robust plug-in gear. Multi-stage
low-wearing PM mixer shaft seal. Low-wearing PM mixing blades made of
special chrome cast.
Exchangeable wear plates, vessel lid with safety lock, this is coupled to
a large dimensioned vessel venting.
Exchangeable pressure outlet, for hoses NW 50, 65 or 100 (standard outlet
NW 65).
Standard
equipment: operating instructions, standard tools and steel discharge
stand, truck coupling.
Part
no. PM111
484.010
|
|
M
760 DHB
|
|
|
As above but with skip
for quicker, power-saving filling and synchronously-running cement feed
hopper.
Standard
equipment: operating instructions, standard tools and steel discharge
stand, truck coupling.
Part
no. PM111
484.020
|
|
M
760 DHBS
|
|
As above but with a skip and scraper. A
machine ideal for the construction site that is easy to operate. A
cement-feeding hopper that runs synchronously and radio-remotely
controlled scraper shovel with automatic material discharge.
Standard
equipment: operating instructions, standard tools and steel discharge
stand, truck coupling.
Part
no. PM111
484.030
|
| Technical
Data |
M 760 DH |
M 760 DHB |
M 760 DHBS |
| Vessel: |
260 l mixing vessel; 200 l volume; max. perm. 8 bar vessel pressure |
| Output: |
4 m�/h |
4.8 m�/h |
5.0 m�/h |
| Delivery pressure, max.: |
7 bar |
7 bar |
7 bar |
| Delivery distance: |
200 m, 50 storages high |
| Compressor: |
5.3 m�/min; switch-off pressure 7 bar |
| Drive motor: |
BF3M 1011 Diesel
engine 47 kW |
| Chassis: |
robust T-chassis |
| Weight: |
1625 kg |
1780 kg |
1945 kg |
| Length: |
4250 mm over everything |
4510 mm over everything |
4510 mm over everything |
| Width: |
1460 mm |
1460 mm |
1460 mm |
| Height: |
1450 mm |
1450 mm; 2410 mm
Skip set vertically |
1450 mm; 2410 mm
Skip set vertically |
| Filling height: |
820 mm; vessel inclined seated at rear |
600 mm |
600 mm |
| Largest grain: |
16 mm |
16 mm |
16 mm |
| Part. No. |
PM111484.010 |
PM111484.020 |
PM111484.030 |
| Supplementary equipment for the Mixokret M 760 DH, M 760 DHB, M 760 DHBS |
PM Part no. |
| Central lubrication (213 553.001), pneum. and hydraulic |
002776.002 |
| 2.2 bar cut-off (213 715.001) |
002760.009 |
| Automatic delivery air control |
213870.001 |
| Toolbox (only for M 760DH/ 213 578.002) |
002785.006 |
| Wear plates (214 538.009) in dished ends |
002737.009 |
| Wear plates (214 306.008) "Hardox" 4 mm (instead serial parts) |
002787.004 |
| Spotlights (214 328.002) 12 V, 50 W Halogen |
002786.005 |
| Mixing time adjustment (214 337.006) 5�30 sec. |
002788.003 |
| Bag cutter for skip |
212722.008 |
| Car coupling EM 30 R |
214334.009 |
| Coupling ring (truck) |
212700.004 |