|
The easy-to-use Mixokret
The
M 740 is the lightest and most easy-to-use mixing and conveying unit with a
liquid-cooled 3-cylinder Diesel engine. Suitable for mixing and conveying
floor screed, sand and fine concrete grain up to 16 mm.
|
|
| M
740
D
|
|
|
Mixer
drive via V-belt drive with overload protection (patent) and robust
plug-in gear. Multi-stage low-wearing PM mixer shaft seal. Low-wearing PM
mixing blades made of special chrome cast.
Exchangeable wear plates, vessel lid with safety lock, this is coupled to
a large dimensioned vessel venting.
Exchangeable pressure outlet, for hoses NW 50, 65 or 100 (standard outlet
NW 65).
Standard equipment: operating instructions, standard tools and steel
discharge stand, truck coupling.
Part
no. PM111
458.010
|
|
M
740 DB
|
|
|
As
above but with skip for quicker, power-saving filling and
synchronously-running cement feed hopper.
Standard
equipment: operating instructions, standard tools and steel discharge
stand, truck coupling.
Part
no. PM111
458.020
|
|
M
740 DBS
|
|
As
the M 740 D above but with a skip and scraper. A machine ideal for the
construction site that is easy to operate. A cement-feeding hopper that
runs synchronously and radio-remotely controlled scraper shovel with
automatic material discharge.
Standard
equipment: operating instructions, standard tools and steel discharge
stand, truck coupling.
Part
no. PM111
458.030
|
| Technical
Data |
M 740 D |
M 740 DB |
M 740 DBS |
| Vessel: |
260 l mixing vessel;
200 l volume; max. perm. 8 bar vessel pressure |
| Output: |
3.8 m�/h |
4.6 m�/h |
5.0 m�/h |
| Delivery pressure, max.: |
7 bar |
7 bar |
7 bar |
| Delivery distance: |
180
m, 30 storages high |
| Compressor: |
4.1 m�/min;
switch-off pressure 7 bar |
| Drive motor: |
F3M
1011 Diesel engine 33 kW |
| Chassis: |
robust T-chassis |
| Weight: |
1490 kg |
1650 kg |
1930 kg |
| Length: |
4250 mm over everything |
4510 mm over everything |
4510 mm over everything |
| Width: |
1500 mm |
1500 mm |
1500 mm |
| Height: |
1450 mm |
1450 mm; 2410 mm
Skip set vertically |
1450 mm; 2410 mm
Skip set vertically |
| Filling height: |
820 mm; vessel inclined seated
at rear |
600 mm |
600 mm |
| Largest grain: |
16 mm |
16 mm |
16 mm |
| Part. No. |
PM111458.010 |
PM111458.020 |
PM111458.030 |
| Supplementary
equipment for the Mixokret M 740 D, M 740 DB, M 740 DBS |
PM Part no. |
| Central lubrication
(213 553.001), pneum. and hydraulic |
002776.002 |
| 2.2 bar cut-off (213
715.001) |
002760.009 |
| Automatic delivery
air control |
213870.001 |
| Toolbox (only for M
740D/213578.002) |
002785.006 |
| Wear plates (214
538.009) in dished ends |
002737.009 |
| Wear plates (214
306.008) "Hardox" 4 mm (instead serial parts) |
002787.004 |
| Spotlights
(214 328.002) 12 V, 50 W Halogen |
002786.005 |
| Mixing time
adjustment (214 337.006) 5�30 sec. |
002788.003 |
| Bag cutter for skip |
212722.008 |
| Car coupling EM 30 R |
213458.009 |
| Coupling ring
(truck) |
212700.004 |
| Central crane loop |
403871 |