Putzmeister Pneumatic Conveyor:   Mixokret M 735 E/EB/EBS

The largest Mixokret with electrical drive

The modern version with electric drive has now also joined the Mixokret with Diesel engine and compressor. The M 735 solves your delivery problems with sand, mortar and fine concrete with up to 8 mm grain. She is needed everywhere where hose delivery is needed but is extremely quiet and environmentally-friendly. Examples of this are in hospitals, spas and in the inner cities.

M 735 E  

An electric motor drives the mixer shaft via directly mounted screw compressors as well as via V-belts and gear. Multi-stage, wear-resistant mixer shaft seals and low-wearing mixer blades made of special chrome cast iron. Exchangeable wear plates, vessel lid with safety lock and large dimensioned vent. Exchangeable pressure connection for hoses NW 50 and 65 (standard NW 65).

Standard equipment: CEE-plug 63 A, standard accessories, steel discharge pedestal, truck coupling, operating instructions.
Part no. PM111 502.000

M 735 EB  

As above but with skip for quicker and power-saving charging.
Part no. 111.503.000

M 735 EBS  
As before but with additional working alleviation with hydraulically-driven scraper winch with 11 m hauling rope and practical rope guidance on the bucket loader.
Part no. PM111 504.000
Technical Data M 735 E M 735 EB M 735 EBS
Vessel: 260 l mixing vessel; 200 l volume; max. perm. 8 bar vessel pressure
Output: 3 m3/h 3.5 m3/h 4 m3/h
Delivery pressure, max.: 7 bar 7 bar 7 bar
Delivery distance: 180 m, 30 storages high
Scraper: - - 10 m pull cable
Compressor: 4.1 m�/min; AC screw-type compressor 
Drive motor:  30 kW  electric motor 400 V, 50 Hz, 58 A 
nominal current CEE plug 63 A
Chassis: overrung brakes, road-worthy up to 80 (130) km/ h
Weight:  1575 kg  1700 kg  1815 kg
Length: 4000 mm 4000 mm 4000 mm
Width: 1480 mm 1480 mm 1480 mm
Height:  1380 mm 2340 mm 2340 mm
Filling height: 940 mm 650 mm 650 mm
Largest grain: 16 mm  16 mm  16 mm 
Part. No. PM111502.000 PM111503.000 PM111504.000
Supplementary equipment for the Mixokret M 735 E/EB/EBS PM Part no.
Central lubrication (213 553.001), pneum. and hydraulic 002776.002
2.2 bar cut-off (213 715.001)  002788.003
Wear plates (214 538.009) in dished ends 002737.009
Wear plates (214 306.008) "Hardox" 4 mm (instead serial parts) 002787.004
Special paint, hood (RAL-paint)
Special paint, whole machine (RAL paint)
Special lettering with logo and single-colour text