Putzmeister Pneumatic Conveyor:   Mixokret M 705 E Mono  

The M 705E is especially ideal for construction sites with 230 volt power supply.

The economical mixer and pneumatic conveyor machine without compressor. It is driven by a construction site compressor as from 2,5 m3/ min. Ideal for mixing and conveying floor-screed, sand, fine debris and fine concrete up to 8 mm dia. In contrast to the M 700 E (left side) just a normal 230 volt power supply is sufficient for the M 705E .

M 705 E - Mono  

Electric mixer drive via plug-on gear motor. Multi-stage, wear-resistant PM mixer shaft seal. Low-wearing mixing blades made of special cast chrome. Exchangeable wear plates, vessel lid with safety lock; this is coupled with a largely dimensioned vessel vent. Exchangeable pressure connection for hoses NW 50 or 65 (standard outlet NW 65).

Standard equipment: operating instructions, standard tools and steel discharge pedestal, truck coupling.
Part no. 111 498.000
Technical Data M 705 E - Mono
Vessel: 180 l mixer vessel, EU-tested, 150 l effective volume, max. perm. 7 bar vessel pressure
Output: 1.5  - 2.5 m�/h
Delivery pressure, max.: 7 bar
Delivery distance:

120 m wide, 60 m high
Compressor:

Above data depending upon amount of air and air pressure of the compressor.
Compressor to be provided on construction site
From 2,5 m3/ min and 7 bar operating pressure
Drive motor: 

Electric motor 2,2 kW, 50 Hz
230 V alternating current
Chassis: 8 km/ h, to move position on the construction site
Weight:  450 kg 
Length: 1980 mm
Width: 1020 mm
Height: 1100 mm
Filling height: 940 mm
Largest grain: 8 mm 
Part. No. PM11498.000
Supplementary equipment for the Mixokret 
M 705 E - Mono		 PM Part no.
Central lubrication, (210 822.007) pneum. and fully-automatic 002776.002
Wear plates (214 538.009) in dished ends 002737.009
Construction site input, 3 x 2.5 mm2, 20 m with shock-proof plugs 212 960.006