Putzmeister Pneumatic Conveyor: Mixokret M 700 E
|
The M 700 E is especially ideal for building
contractors with The economical mixer and pneumatic conveying
machine
without compressor. It is operated with a site compressor as of 2.5 m�/min. |
|
| M 700 E | |
|
Electric mixer drive via
attachable gear and compensatory coupling. Multi-stage low-wearing PM
mixer shaft seal. Standard equipment:
operating instructions, standard tools and steel discharge stand. |
|
| Technical Data | M 700 E | |
| Vessel: | 260 l mixing vessel; 200 l effective volume; max. perm. 7 bar vessel pressure | |
| Output: | 2 - 3 m�/h | |
| Delivery pressure, max.: | 7 bar | |
| Delivery distance: |
120 m long, 60 m high |
|
| Compressor: |
Above data depending upon amount of air and air pressure of the compressor |
|
| Drive motor: |
Electric motor 7.5 kW, 400 V
3-phase 50 Hz |
|
| Chassis: | 8 km/ h, to move position on the construction site | |
| Weight: | 700 kg | |
| Length: | 2100 mm without tow-bar; 3100 mm over everything | |
| Width: | 1320 mm | |
| Height: | 1150 mm | |
| Filling height: | 820 mm; vessel slanted, seated at rear | |
| Largest grain: | 16 mm | |
| Part. No. | PM111429.004 | |
| Supplementary
equipment for the Mixokret M 700 E |
PM Part no. | |
| Central lubrication, pneum. and fully-automatic | 002776.002 | |
| Wear plates (214 538.009) in dished ends | 002737.009 | |
| Wear plates (214 306.008) 4 mm
"Hardox" instead serial parts |
002737.009 | |
| Tow-bar front part, cpl. car attachment | 212153.004 | |
| Cable 5 x 4 mm2, CEE plug, coupling, 32 Amp., 25 m long |
062922.003 | |
| Cable 5 x 4 mm2, CEE plug, coupling, 32 Amp., 50 m long |
062923.002 | |