Putzmeister Pneumatic Conveyor: Mixokret M 650
|
The �lightweight
version� below pneumatic conveyors. For companies with vehicles that can tow max. 1300 kg. |
|
| M 650 DH | |
|
Mixer drive made out of low-wearing special cast. Hydraulically-driven mixer with forward and rear running. Multistage low-wearing PM mixer shaft seal. Exchangeable wear plates. Mixer vessel lid lock with safety locking and compulsory venting. Exchangeable pressure outlet, for hoses NW 65 and 90. Standard equipment:
outlet NW 65, steel discharge stand, accessories, operating instructions. |
|
| M 650 DHB | |
|
As above but with hydraulically-operated skip with 150 l volume and intermediate hopper for separate feeding of cement. Standard equipment: outlet NW 65, steel discharge stand, accessories, operating instructions.Part no. PM111 408.009 |
|
| Technical Data | M 650 DH | M 650 DHB | |
| Vessel: | 200 l mixing vessel; 150 l volume; max. perm. 4 bar vessel pressure | ||
| Output: | 2 m�/h | 3 m�/h | |
| Delivery pressure, max.: | 4.5 bar | 4.5 bar | |
| Delivery distance: | 80 m long, 45 m high | ||
| Compressor: | 2.5 m�/min; switch-off pressure 4.5 bar | ||
| Drive motor: | 3-cylinder-Diesel engine, 18.5 kW at 2650 rpm | ||
| Chassis: | robust T-chassis, 1300 kg | ||
| Weight: | 980 kg | 1335 kg | |
| Length: | 4200 mm over all | 4380 mm over all | |
| Width: | 1395 mm | 1395 mm | |
| Height: | 1425 mm | 2370 mm | |
| Filling height: | 880 mm | 600 mm (skip) | |
| Skip set vertically, seated at rear | |||
| Largest grain: | 16 mm | 16 mm | |
| Part. No. | PM111420.003 | PM111408.009 | |
| Supplementary equipment for the Mixokret M 650 DH/DHB | PM Part no. | ||
| Central lubrication (213 080.008), pneum. and hydraulic | 002776.002 | ||
| 2.2 bar cut-off (208 511.003) | 002760.009 | ||
| Wear plates (214 538.009) in dished ends | 002737.009 | ||
| Working lights (214 328.002), 12 V , 50 W halogen | 002786.005 | ||
| Bag cutter for skip | 212722.008 | ||
| Individual painting (RAL) | |||