Putzmeister Pneumatic Conveyor:   Mixokret M 500 E

The M 500 E is especially suitable for building contractors with compressors in their machinery plant

The powerful mixing-conveying machine without compressor. The M 500 with electric motor and 640 l vessel is the ideal solution for many mixing and delivery tasks. It is operated by an extra compressor with a performance of at least 5 m�/min. Especially ideal for mixing and conveying lean-mixed concrete 0�16 (32) mm, job-site mixed concrete and ready mixed concrete, and masonry mortar as well as floor screed, sand and fines.

 

M 500 E  

Mixer drive via an attachable gear motor. Multi-stage wear resistant PM mixer shaft seal. Low-wearing mixer tools made of special chrome cast.

Exchangeable wear plates. Vessel lid lock with safety locking - this is coupled to a large dimensioned vessel venting. Exchangeable pressure outlet, for hoses NW 50, 65 or 100 (standard outlet NW 65).

Standard equipment: operating instructions, standard tools and discharge stand.
Part no. PM111 471.020

Technical Data M 500 E
640 l mixing vessel; 500 l effective volume; max. perm. 7 bar vessel pressure
Output: up to 6 m�/h; with ready mixed material and powerful compressor
Delivery pressure, max.: 6.5 bar
Delivery distance:

270 m long, 190 m high
Compressor:

Above data depending upon amount of air and air pressure of the compressor
Compressor to be provided on construction site
as of min. 5 m�/min and 7 bar operating pressure
Drive motor: 

Electric motor 18.5 kW, 400 V 3-phase 50 Hz
star delta motor protection turning switch
Chassis: 8 km/ h, to move position on the construction site
Weight:  980 kg 
Length: 2800 mm without tow-bar; 3680 mm over everything
Width: 1350 mm
Height: 1250 mm
Filling height: 1140 mm; vessel slanted, seated at rear
Largest grain: 32 mm 
Part. No. PM111471.020
Supplementary equipment for the Mixokret M 500 E PM Part no.
Water metering device R1�, electr. water meter 202237.008
El. drive, 22 kW instead of 18.5 kW - surcharge 002792.002