Putzmeister Mixer pump:   MP 35

The Premium Plastering Machine that fulfils every wish.

The MP 35 is one of the most modern and ergonomic mixer pumps on the market at present. 

Every operating element is just in the right place where it should be and every working step with the MP 35 is precisely tuned to the field. Apart from this, the MP 35 is a typical Putzmeister mixer pump. It can be dismantled into construction units that are easy to carry and it handles all types of ready-mix mortar - from the sack, silo or container - and is unbelievably compact.

It is ideal for internal plasters (gypsum/ gypsum-lime plaster), external rendering (lime/ lime-cement and insulating plasters), floor-screed, bonding mortar as well as reinforcement mortars.

MP 35 S  

Mixer pump drive, electric 5.5 kW 392 rpm, 400 V/50 Hz, pump type D6 Power, output 25 l/min at max. delivery pressure of 30 bar, max. grain 4 mm, hopper content 115 star-wheel drive 1.1 kW 23 rpm, conical mixer tube, hose connection M35/V25 mm. A feed cable with CEE plug 5 x 4 mm2, 32 A is recommended here. Incl. built-in water pump. 

Standard equipment: 1 x mortar hose 15 m, 25/40 mm, 1x air hose 15 mm, 1⁄2 �, spray gun NW 25/40, mixing shaft MI, compressor 208 NL/min with switch-off, cleaning tool, operating instructions, standard tool.
Part no. PM111 485.006

MP 35

Mixer pump drive, electr. 5.5 kW 392 rpm, 400 V/50 Hz, pump type D6 Power, output 25 l/min at max. delivery pressure of 30 bar, max. grain 4 mm, hopper content 115 l, star-wheel drive 1.1 kW 23 rpm, conical mixer tube, hose connection M35/V25 mm. Without built-in water pump. Recommended here is a feed cable with CEE plug 5x4 mm�, 
32 A. 

Standard equipment: 1 x mortar hose 15 m, 25/40 mm, 1x air hose 15 m, 1⁄2'', spray gun NW 25/40, mixing shaft MI, compressor 208 NL/min with switch-off, cleaning tool, operating instructions, standard tools.
Part no.111 458.019

Technical data MP 35 S MP 35
Pump type: D6 Power
Output: 25 l/min
Del. pressure: 30 bar
Delivery distance: up to 40 m, 15 m high
Air compressor: piston compressor, 208 NL/min suction performance
Drive pump: 5.5 kW / 392 rpm
Drive hopper: 1.1 kW / 23 rpm
Weight: 240 kg 235 kg
Length: 1063 mm
Width: 682 mm
Height: 1445 mm
Filling height: 920 mm
Standard equipment for the MP 35 PM Part no.
Mortar hose NW 25, 15 m with couplings 25/40 211 966.001
Air hose 1⁄2'', 15 m 212 333.002
Water connection piece GEKA/V25/40 207 936.003
Spray gun standard � short � 25/40 402 592
Reduction V35/V25/40 207 795.008
Stator D6 � Power � 206 345.006
Rotor D6 � Power � 203 452.002
Mixing tube � cleaner, cpl. 212 132.009
Supplementary equipment for the MP 35 PM Part no.
Blower hood with control cable, probe, rectangular 413464
Pressure booster pump (212 858.008), NTM built-in 002 781.000
Pressure booster pump added on site 230 V, 3.6 m�/h 208 186.001
Pressure booster pump added on site with automatic switching, 230V, 3.6 m�/h 212 383.007
Water filter 5m�/h, 3⁄4� GEKA 214 780.006
Cable 5 x 4 mm�, CEE plug, coupling 32 A,25 m long 062 022.003